No. of sale: 300926AG
Starting date
ManufacturerFocus ModelF-250 Year1999 ObservationsWeb-fed flexographic label press
This flexographic label press can print using solvent-based
and water-based inks.
Number of colors: 4
Type: Used web-fed flexographic label press
Printable materials: PE, PP, OPP, PET, Paper
Print width: 240 mm
Material width: 250 mm
Print repeat: 254 - 333 mm
Mechanical speed: Up to 80 m/min
Unwinder and rewinder:
Unwinder: Max. roll diameter: 550 mm
Rewinder: Max. roll diameter: 550 mm
Drying system: 4 infrared drying systems
Accessories:
1 edge rewinder
2 hot air dryers
Open-chamber ink fountains
3 sets of print cylinders
ManufacturerFocus ModelF-250 Year1999 ObservationsWeb-fed flexographic label press
This flexographic label press can print using solvent-based
and water-based inks.
Number of colors: 4
Type: Used web-fed flexographic label press
Printable materials: PE, PP, OPP, PET, Paper
Print width: 240 mm
Material width: 250 mm
Print repeat: 254 - 333 mm
Mechanical speed: Up to 80 m/min
Unwinder and rewinder:
Unwinder: Max. roll diameter: 550 mm
Rewinder: Max. roll diameter: 550 mm
Drying system: 4 infrared drying systems
Accessories:
1 edge rewinder
2 hot air dryers
Open-chamber ink fountains
3 sets of print cylinders
Start price 15.000 €
ManufacturerA B Graphic International Limited / Burton Engineering Company Ltd ModelOMEGA 330 Year2003 ObservationsFlexographic roll and label printer
Comprising: Converter, slitter, rewinder, and roll label inspection unit.
1. PERFORMANCE AND SPEED SPECIFICATIONS
Maximum speed (Standard machine): Up to 300 m/min.
Maximum speed (With inspection or die-cutting systems): Up to 220 m/min.
Noise emission: Approximately 78 dB(A) when operating at 80% of maximum speed
(measured at a distance of 1 m and a height of 1.6 m).
2. ROLL HANDLING AND UNWINDING
Maximum master roll diameter: 700 mm
Maximum web width: 220 mm
Air mandrel diameter (Inlet): 110 mm
Tension control: Automatic (Nominal setting via HMI/pneumatic brake)
Web guiding: Automatic electronic edge detection system with auto-lock
3. SLITTING AND REWINDING UNIT
Standard slitting module: Slitting station equipped with 3 blades
Standard rewind mandrel: Pneumatic, 76 mm diameter
Traction control: Longitudinal nip roller
4. SUPPLY AND INSTALLATION REQUIREMENTS
Power supply: 380-415 V | 3-phase | 25 A | 50-60 Hz
Compressed air supply: 5 bar (Consumption: 5 cm)
Required floor space: 1.2 meters wide x 6.7 meters long
Mounting and location: Must rest on a solid floor. Includes leveling screws
on the chassis feet
Lifting Logistics: Designed to be lifted exclusively by
forklift at the indicated section of the frame
5. CONTROL AND AUTOMATION SYSTEM
Operator Interface (HMI): Paradigm digital display with numeric keypad,
navigation keys, and programmable function keys (SK1 to SK4 and F1 to F7)
Processing Unit (PLC): Mitsubishi
Selectable Counting Methods: By label count (using
an infrared opacity sensor to detect the gap/liner) or by physical length
in meters
Memory backup battery: Estimated life of 4 years for the HMI and 5
years for the PLC (Preventive replacement recommended between 2 and 2.5 years)
6. INSPECTION AND SAFETY MODULES
Visual inspection area: Splicing table with integrated pneumatic clamps
and tape dispenser for manual defect rectification.
Mechanical safety: Blade housing with an upper guard linked to a
magnetic safety switch and stop relay (p. 5). Rear doors
feature switches that require the power supply to be cut before opening.
Directive compliance: CE certification under the Declaration of
Conformity 93/44/EEC and BS EN machinery safety standards.
We also provide 12 magnetic dies designed for various product formats.
ManufacturerA B Graphic International Limited / Burton Engineering Company Ltd ModelOMEGA 330 Year2003 ObservationsFlexographic roll and label printer
Comprising: Converter, slitter, rewinder, and roll label inspection unit.
1. PERFORMANCE AND SPEED SPECIFICATIONS
Maximum speed (Standard machine): Up to 300 m/min.
Maximum speed (With inspection or die-cutting systems): Up to 220 m/min.
Noise emission: Approximately 78 dB(A) when operating at 80% of maximum speed
(measured at a distance of 1 m and a height of 1.6 m).
2. ROLL HANDLING AND UNWINDING
Maximum master roll diameter: 700 mm
Maximum web width: 220 mm
Air mandrel diameter (Inlet): 110 mm
Tension control: Automatic (Nominal setting via HMI/pneumatic brake)
Web guiding: Automatic electronic edge detection system with auto-lock
3. SLITTING AND REWINDING UNIT
Standard slitting module: Slitting station equipped with 3 blades
Standard rewind mandrel: Pneumatic, 76 mm diameter
Traction control: Longitudinal nip roller
4. SUPPLY AND INSTALLATION REQUIREMENTS
Power supply: 380-415 V | 3-phase | 25 A | 50-60 Hz
Compressed air supply: 5 bar (Consumption: 5 cm)
Required floor space: 1.2 meters wide x 6.7 meters long
Mounting and location: Must rest on a solid floor. Includes leveling screws
on the chassis feet
Lifting Logistics: Designed to be lifted exclusively by
forklift at the indicated section of the frame
5. CONTROL AND AUTOMATION SYSTEM
Operator Interface (HMI): Paradigm digital display with numeric keypad,
navigation keys, and programmable function keys (SK1 to SK4 and F1 to F7)
Processing Unit (PLC): Mitsubishi
Selectable Counting Methods: By label count (using
an infrared opacity sensor to detect the gap/liner) or by physical length
in meters
Memory backup battery: Estimated life of 4 years for the HMI and 5
years for the PLC (Preventive replacement recommended between 2 and 2.5 years)
6. INSPECTION AND SAFETY MODULES
Visual inspection area: Splicing table with integrated pneumatic clamps
and tape dispenser for manual defect rectification.
Mechanical safety: Blade housing with an upper guard linked to a
magnetic safety switch and stop relay (p. 5). Rear doors
feature switches that require the power supply to be cut before opening.
Directive compliance: CE certification under the Declaration of
Conformity 93/44/EEC and BS EN machinery safety standards.
We also provide 12 magnetic dies designed for various product formats.
Start price 27.500 €
ManufacturerConverpress Model330 SRD3/F1 Year2002 ObservationsLabel converting and finishing equipment
Comprising:
Unwinder.
Web guide.
1 flexographic print unit.
3 die-cutting stations.
Matrix stripping (waste removal).
Slitting.
Final rewinder.
Electronic tension control.
Technical specifications:
Maximum web width: 330 mm
Effective print width: 320-330 mm
Maximum speed: 100-115 m/min
Unwinder diameter: 700-800 mm
Rewinder diameter: 600-700 mm
Core: 76 mm
Power supply: 380 V three-phase
Installed power: 8.5 kW
Also features a sheet delivery table, also known as a sheeter.
ManufacturerConverpress Model330 SRD3/F1 Year2002 ObservationsLabel converting and finishing equipment
Comprising:
Unwinder.
Web guide.
1 flexographic print unit.
3 die-cutting stations.
Matrix stripping (waste removal).
Slitting.
Final rewinder.
Electronic tension control.
Technical specifications:
Maximum web width: 330 mm
Effective print width: 320-330 mm
Maximum speed: 100-115 m/min
Unwinder diameter: 700-800 mm
Rewinder diameter: 600-700 mm
Core: 76 mm
Power supply: 380 V three-phase
Installed power: 8.5 kW
Also features a sheet delivery table, also known as a sheeter.
Start price 18.000 €
ManufacturerRevolver ModelVectra 330 Year2015 ObservationsTurret Rewinder
Turret rewinder with adhesive-free start for advanced applications
Maximum roll diameter: 350 mm
Web width: 330 mm, 410 mm, 510 mm
Pneumatic mandrels: 4 x 76 mm as standard
Wrapping tools: To suit core outside diameter
Maximum web speed: 100 m/min with 25-38 mm mandrels; 150 m/min with 40-76 mm mandrels
Counter: Labels, feet, or meters
The servo-driven Vectra with adhesive-free start not only secures the
substrate to the cores at the start of a new roll without stopping or slowing
down the converting equipment, but can also be fitted with a label
applicator to print and apply labels when closing the finished roll. A
thermal transfer printer can print fixed or variable data onto the
roll-closing labels.
Printed labels are collected by a unique mechanism (patent pending)
that applies them to all finished rolls in a single movement.
The label applicator is fully programmable via the machine's touchscreen
to suit the requirements of each job.
Taper tension control, servo-drive - open-loop tension control, 6 web
splitters (5 lanes), touchscreen HMI with graphical operator instructions
and error messages, automatic roll ejection mechanism, adjustable front
and rear core stops, spindle setting readout for all configurations.
ManufacturerRevolver ModelVectra 330 Year2015 ObservationsTurret Rewinder
Turret rewinder with adhesive-free start for advanced applications
Maximum roll diameter: 350 mm
Web width: 330 mm, 410 mm, 510 mm
Pneumatic mandrels: 4 x 76 mm as standard
Wrapping tools: To suit core outside diameter
Maximum web speed: 100 m/min with 25-38 mm mandrels; 150 m/min with 40-76 mm mandrels
Counter: Labels, feet, or meters
The servo-driven Vectra with adhesive-free start not only secures the
substrate to the cores at the start of a new roll without stopping or slowing
down the converting equipment, but can also be fitted with a label
applicator to print and apply labels when closing the finished roll. A
thermal transfer printer can print fixed or variable data onto the
roll-closing labels.
Printed labels are collected by a unique mechanism (patent pending)
that applies them to all finished rolls in a single movement.
The label applicator is fully programmable via the machine's touchscreen
to suit the requirements of each job.
Taper tension control, servo-drive - open-loop tension control, 6 web
splitters (5 lanes), touchscreen HMI with graphical operator instructions
and error messages, automatic roll ejection mechanism, adjustable front
and rear core stops, spindle setting readout for all configurations.
Start price 45.000 €
