No. of sale: 281123P
Starting date
ManufacturerILLIG ModelRDM 37/10 ObservationsComplete lot consisting of (x6) thermoforming machines, (x39) moulds with accessories and various tools:
LIST OF MACHINERY: SIX ILLIG THERMOFORMING MACHINES MOD. RDM 37/10 (1980 / 1984) For the manufacture of EPS/PS - PVC - PP - PET and similar containers. Technical features: - Max. moulding surface: 475 x 250 mm. - Max. sheet width: 495 mm. - Max. feed length: 280 mm. - Max. mould clamping force: 6 tons. - Max. moulding depth: 125 mm. - Heating body. - Molding and die-cutting body. - Cycles per material: 25 cycles/min. (average) - Material thickness: up to 2.3 mm. - Heating zones: 4 + chain heating. -Diam. max. coil capacity: 1,200 mm. - Higher heating consumption: 9.5 kW. - Lower heating consumption: 6.9 kW. - 1 ILLIG die-cutting machine as 2nd station for RDM 37/10 - 1 SEMSO brand pre-cut die-cutting machine AN ILLIG thermoforming machine mod. RDM 63/10 For the manufacture of EPS/PS - PVC - PP - PET and similar containers. Technical features: - Max. moulding surface: 850 x 310 mm. - Max. feed length: 280 mm - Max. sheet width: 870 x 310 mm. - Max. mould clamping force: 6 ton.65 - Max. moulding depth: 140 mm. - Heating body. - Molding and die-cutting body. - Cycles per material: 25 cycles/min. (average) - Material thickness: up to 2.3 mm. - Heating zones: 4 + chain heating. -Diam. max. coil capacity: 1,200 mm. - Top heating consumption: 11.5 kW. - Lower heating consumption: 8.9 kW. - 1 ILLIG die-cutter as 2nd station for RDM 63/10
ONE ILLIG thermoforming machine mod. RD 76 (under repair) For the manufacture of EPS/PS - PVC - PP - PET and similar containers. Technical features: - Max. moulding surface: 860 x 640 mm. - Max. feed length: 480 mm. - Max. sheet width: 970 mm. - Max. mould clamping force: 6 ton.65 - Max. moulding depth: 120 mm. - Heating body. - Molding Body - Die-cut body apart. - Cycles per material: 25 cycles/min. (average) - Material thickness: up to 2.3 mm. - Heating zones: 4 + chain heating. -Diam. max. coil capacity: 1,200 mm. - Higher heating consumption: 22.5 kW. - Lower heating consumption: 16.9 kW.
Mateu and Sole crusher mill mod. Mecanofil (2006) With forced suction with direct delivery to silo Power 40 Hp Silo with structure prepared to place big-bags A complete set of freshly sharpened replacement blades CIKLOP Automatic Pallet Palletizer/Wrapper With top support for high and unstable loads Set of 3 Ingersoll Rand screw compressors mod. SSR + Cooler Fully interconnected with the possibility of independent operation With regulations and stamps up to date 40 hp compressor 37 hp compressor 30 hp compressor Ingersoll Rand cooler mod. TMS Vertical Accumulator Cooler (Cold Water Circuit Molds/Molding Machines) MTA Brand mod. TAE-101 14 Kw LINDE Electric Forklift Lifting power 1,500 kg. Elevation height, 7 m. Miscellaneous - Observations Complete workshop with table, tools, etc.-, Heavy load racking. 2,000 kg electric pallet truck.
MOULDS: 39 moulds with their supplements and tools for both stacking and different heights of containers within the same mould, with which 71 different references can be manufactured. We have a wide variety of stackers with channels, for irregular figures and specific for number of cavities / mould and 3 stackers, boat type for the stacking of most of the cup-type containers, which we have in the moulds. ACCESSORIES MOULDING MACHINES - Replacement pistons - Machine reducers R-63 and R-37 - Heating resistors - Compressed air valves - Moulding cams - Main cams for cutting, as well as for moulds without cutting - Mechanical spare parts - Machine translation part - Main axles - Long and short material advance cams - Auger for mould height adjustment - Sprockets, bearings, etc.
EXCLUSIVE MOULDS FOR R-63/10 (large machine) - 1 mould 2 rectangular units 280 x 235 x 55, with channel stacker - 1 mould 5 rectangular units 170 x 105 x 65, with channel stacker - 1 mould 4 rectangular units 140 x 130 x 60, with perforation mechanism (4 outlets), at the bottom of the container, with channel stacker We have reducing plates, with which all moulds for Illig R-37 can be coupled to the machine Illig R-63 MOULDS FOR R-37/10 (small machines) - 2 moulds 8 units (double row) Ø70, sockets with tools for 140 cc cubications - 150cc - 180cc and 200 cc, with boat appliator and unit counter - 1 mould of 8 units (double row) Ø78, Vessels with tools for cubic units of 250 cc - 300 cc and 350 cc with boat appliator and counter units - 1 mould of 8 units (double row) Ø73 with engraved sleeves for dosing cup 175 cc with boat type appliator and counter units - 1 mould of 6 units Ø73 with engraved sleeves for dosing cup 175 cc with boat appliator and counter units - 1 mould 4 units Ø86, cups with tools for 360 cc and 420 cc cubices - 1 mould 4 units Ø86, cups with tools for cubices of 500 cc - 1 mould 5 units Ø73, tubs with tools for cubices of 70 cc and 125 cc, with stacker channels - 1 mould 4 units Ø98, tubs with tools for 125cc, 180 cc and 250 cc cubications, with channel stacker - 1 mould 3 units Ø125, tubs with tools for cubicing 500 cc, with flat bottom, tools for curved bottom, tools for corrugated flan packaging, flat bottom high 25 for cream and bottom for cubicage 1,000 cc, with stacker channels - 1 mould of 6 units Ø73, 70/125 tub lids, tool for Ø70 tub surprise holder holder, with channel stacker - 1 mould of 3 units Ø98, lids for tubs 180/250 - 1 mould of 3 pieces Ø125, tub lids 500/1000 - 1 mould of 4 units Ø92, tubs with tools for heights of 35 - 50 - 55 - 70, with channel stacker - 1 mould of 4 units Ø92, lids for tubs 92/35/50/55/70, with channel stacker - 1 mould of 6 units Ø73, with corrugated liners for flan with 125 cc cubication, with boat-type stacker and unit counter - 1 mould of 4 units Ø97 x 60 hexagonal - 1 mould of 5 units Ø78 x 110 cup type, with boat stacker and unit counter - 1 mould 5 pieces lid Ø78, for cup packaging - 1 mould 6 units Ø70, with tools for cubication 125 cc, tools for cup type shirts, with boat stacker and unit counter - 1 mould 4 pieces Ø115 x 45, container for cheesecake - 1 mould 4 pieces Ø84, lids, for tubs Ø80, with channel stacker - 1 mould 6 pieces Ø65 x 75, for 125 cc cubication, with boat stacker and unit counter - 1 mould 4 units Ø90, lids, for tub Ø90 of 250 cc, with channel stacker - 1 mould 5 units Ø90 x 75, tubs with cubicage of 250 cc, with boat stacker and unit counter - 1 mould 3 rhomboid units, 4 departments 130 x 90 x 36, with channel stacker, with additional machine for pre-cutting - 1 mould 6 units Ø75 x 68, with 160 cc cubication, with boat stacker and unit counter - 1 mould 6 units Ø68 x 72, with 120cc cubication, with boat stacker and unit counter - 2 moulds of 4 units Ø95 x 40, with 12-edge liners, with 140 cc cubication, with channel stacker - 1 mould of 6 units Ø70 x 70, with 145 cc cubication, with boat stacker and unit counter - 1 mould of 2 units with 4 square departments of 126 x 126, with heights of 25 - 50 -70 - 1 mould of 3 units Ø98, with tools for 250cc - 350cc - 500cc cubices - 1 mould of 3 units 2 rectangular units of 175 x 87, 140 cc cubication, with channel stacker - 1 mould of 2 units Ø170, mod, dessert plate, with table stacker and unit counter - 1 mould of 2 units 157 x 157, zafata type plate, with table type stacker and unit counter.
ManufacturerILLIG ModelRDM 37/10 ObservationsComplete lot consisting of (x6) thermoforming machines, (x39) moulds with accessories and various tools:
LIST OF MACHINERY: SIX ILLIG THERMOFORMING MACHINES MOD. RDM 37/10 (1980 / 1984) For the manufacture of EPS/PS - PVC - PP - PET and similar containers. Technical features: - Max. moulding surface: 475 x 250 mm. - Max. sheet width: 495 mm. - Max. feed length: 280 mm. - Max. mould clamping force: 6 tons. - Max. moulding depth: 125 mm. - Heating body. - Molding and die-cutting body. - Cycles per material: 25 cycles/min. (average) - Material thickness: up to 2.3 mm. - Heating zones: 4 + chain heating. -Diam. max. coil capacity: 1,200 mm. - Higher heating consumption: 9.5 kW. - Lower heating consumption: 6.9 kW. - 1 ILLIG die-cutting machine as 2nd station for RDM 37/10 - 1 SEMSO brand pre-cut die-cutting machine AN ILLIG thermoforming machine mod. RDM 63/10 For the manufacture of EPS/PS - PVC - PP - PET and similar containers. Technical features: - Max. moulding surface: 850 x 310 mm. - Max. feed length: 280 mm - Max. sheet width: 870 x 310 mm. - Max. mould clamping force: 6 ton.65 - Max. moulding depth: 140 mm. - Heating body. - Molding and die-cutting body. - Cycles per material: 25 cycles/min. (average) - Material thickness: up to 2.3 mm. - Heating zones: 4 + chain heating. -Diam. max. coil capacity: 1,200 mm. - Top heating consumption: 11.5 kW. - Lower heating consumption: 8.9 kW. - 1 ILLIG die-cutter as 2nd station for RDM 63/10
ONE ILLIG thermoforming machine mod. RD 76 (under repair) For the manufacture of EPS/PS - PVC - PP - PET and similar containers. Technical features: - Max. moulding surface: 860 x 640 mm. - Max. feed length: 480 mm. - Max. sheet width: 970 mm. - Max. mould clamping force: 6 ton.65 - Max. moulding depth: 120 mm. - Heating body. - Molding Body - Die-cut body apart. - Cycles per material: 25 cycles/min. (average) - Material thickness: up to 2.3 mm. - Heating zones: 4 + chain heating. -Diam. max. coil capacity: 1,200 mm. - Higher heating consumption: 22.5 kW. - Lower heating consumption: 16.9 kW.
Mateu and Sole crusher mill mod. Mecanofil (2006) With forced suction with direct delivery to silo Power 40 Hp Silo with structure prepared to place big-bags A complete set of freshly sharpened replacement blades CIKLOP Automatic Pallet Palletizer/Wrapper With top support for high and unstable loads Set of 3 Ingersoll Rand screw compressors mod. SSR + Cooler Fully interconnected with the possibility of independent operation With regulations and stamps up to date 40 hp compressor 37 hp compressor 30 hp compressor Ingersoll Rand cooler mod. TMS Vertical Accumulator Cooler (Cold Water Circuit Molds/Molding Machines) MTA Brand mod. TAE-101 14 Kw LINDE Electric Forklift Lifting power 1,500 kg. Elevation height, 7 m. Miscellaneous - Observations Complete workshop with table, tools, etc.-, Heavy load racking. 2,000 kg electric pallet truck.
MOULDS: 39 moulds with their supplements and tools for both stacking and different heights of containers within the same mould, with which 71 different references can be manufactured. We have a wide variety of stackers with channels, for irregular figures and specific for number of cavities / mould and 3 stackers, boat type for the stacking of most of the cup-type containers, which we have in the moulds. ACCESSORIES MOULDING MACHINES - Replacement pistons - Machine reducers R-63 and R-37 - Heating resistors - Compressed air valves - Moulding cams - Main cams for cutting, as well as for moulds without cutting - Mechanical spare parts - Machine translation part - Main axles - Long and short material advance cams - Auger for mould height adjustment - Sprockets, bearings, etc.
EXCLUSIVE MOULDS FOR R-63/10 (large machine) - 1 mould 2 rectangular units 280 x 235 x 55, with channel stacker - 1 mould 5 rectangular units 170 x 105 x 65, with channel stacker - 1 mould 4 rectangular units 140 x 130 x 60, with perforation mechanism (4 outlets), at the bottom of the container, with channel stacker We have reducing plates, with which all moulds for Illig R-37 can be coupled to the machine Illig R-63 MOULDS FOR R-37/10 (small machines) - 2 moulds 8 units (double row) Ø70, sockets with tools for 140 cc cubications - 150cc - 180cc and 200 cc, with boat appliator and unit counter - 1 mould of 8 units (double row) Ø78, Vessels with tools for cubic units of 250 cc - 300 cc and 350 cc with boat appliator and counter units - 1 mould of 8 units (double row) Ø73 with engraved sleeves for dosing cup 175 cc with boat type appliator and counter units - 1 mould of 6 units Ø73 with engraved sleeves for dosing cup 175 cc with boat appliator and counter units - 1 mould 4 units Ø86, cups with tools for 360 cc and 420 cc cubices - 1 mould 4 units Ø86, cups with tools for cubices of 500 cc - 1 mould 5 units Ø73, tubs with tools for cubices of 70 cc and 125 cc, with stacker channels - 1 mould 4 units Ø98, tubs with tools for 125cc, 180 cc and 250 cc cubications, with channel stacker - 1 mould 3 units Ø125, tubs with tools for cubicing 500 cc, with flat bottom, tools for curved bottom, tools for corrugated flan packaging, flat bottom high 25 for cream and bottom for cubicage 1,000 cc, with stacker channels - 1 mould of 6 units Ø73, 70/125 tub lids, tool for Ø70 tub surprise holder holder, with channel stacker - 1 mould of 3 units Ø98, lids for tubs 180/250 - 1 mould of 3 pieces Ø125, tub lids 500/1000 - 1 mould of 4 units Ø92, tubs with tools for heights of 35 - 50 - 55 - 70, with channel stacker - 1 mould of 4 units Ø92, lids for tubs 92/35/50/55/70, with channel stacker - 1 mould of 6 units Ø73, with corrugated liners for flan with 125 cc cubication, with boat-type stacker and unit counter - 1 mould of 4 units Ø97 x 60 hexagonal - 1 mould of 5 units Ø78 x 110 cup type, with boat stacker and unit counter - 1 mould 5 pieces lid Ø78, for cup packaging - 1 mould 6 units Ø70, with tools for cubication 125 cc, tools for cup type shirts, with boat stacker and unit counter - 1 mould 4 pieces Ø115 x 45, container for cheesecake - 1 mould 4 pieces Ø84, lids, for tubs Ø80, with channel stacker - 1 mould 6 pieces Ø65 x 75, for 125 cc cubication, with boat stacker and unit counter - 1 mould 4 units Ø90, lids, for tub Ø90 of 250 cc, with channel stacker - 1 mould 5 units Ø90 x 75, tubs with cubicage of 250 cc, with boat stacker and unit counter - 1 mould 3 rhomboid units, 4 departments 130 x 90 x 36, with channel stacker, with additional machine for pre-cutting - 1 mould 6 units Ø75 x 68, with 160 cc cubication, with boat stacker and unit counter - 1 mould 6 units Ø68 x 72, with 120cc cubication, with boat stacker and unit counter - 2 moulds of 4 units Ø95 x 40, with 12-edge liners, with 140 cc cubication, with channel stacker - 1 mould of 6 units Ø70 x 70, with 145 cc cubication, with boat stacker and unit counter - 1 mould of 2 units with 4 square departments of 126 x 126, with heights of 25 - 50 -70 - 1 mould of 3 units Ø98, with tools for 250cc - 350cc - 500cc cubices - 1 mould of 3 units 2 rectangular units of 175 x 87, 140 cc cubication, with channel stacker - 1 mould of 2 units Ø170, mod, dessert plate, with table stacker and unit counter - 1 mould of 2 units 157 x 157, zafata type plate, with table type stacker and unit counter.
Start price 300.000 €
