Lots

Manufacturer
Travis 2000
Model
M2000
Year
2016
No. Series
TW 213
Observations
Machining center with numerical control Fagor, model: 8055 Power, Table surface: 2185x813 mm, Stroke axis X: 2000 mm, Stroke axis Y: 860, Stroke Z axis: 710 mm, Max. Spindle speed: 6000 rpm, Fast advances x, y: 18000 mm / min, Fast feed z: 10000 mm / min, Work progress x, y, z: 5000 mm / min, hardened and ground guides with Turcite coating B, pneumatic tool lasher, rigid tapping, spindle-type chip extractor with intermittent pressure pump, heat exchanger in electrical panel, centralized and automatic lubrication, complete cooling system, integral fairing, portable electronic handwheel with axis selector and mushroom emergency, lighting lamp, output for RS-232 communication system, ethernet, bases and leveling screws, set of service tools and CE regulations., Tool fixing system: Pneumatic, Number of tools: 20, Motor: 20 hp . External dimensions: 5080x4000x2820mm, Machine weight: 8.500Kg.
Dimensions
5000 mmx4000 mmx2820 mm
Weight
8500kg

Manufacturer
Fadal
Model
VMC 8030
Year
1999
No. Series
9910363
Observations
Vertical machining center, with CNC control, brand: Fadal, type: 32 MP, Axes: X axis: 2.032 mm, Y axis: 762 mm, Z axis: 762 mm, Power 22.5 HP: Revolutions: 10,000 rpm, table dimensions work: (length x width x length): 2.095x1.016x762mm, load capacity of the table: 1.750 kg; number porta-herramientas: 21, External dimensions: 5.300x3.250x3.150mm, Machine weight: 8.400 kg.

Manufacturer
Lean
Model
FTC-20
Year
2004
No. Series
TD 356
Observations
CNC Lathe with Control: Fanuc -OI-TB, Max. of turning: 343 mm, Diameter max. turning length: 250 mm, Spindle bore: 52 mm, Number of turrets: 1, Tailstock: yes, Bar loader: yes, Machine dimensions: (Length x width x height): 4300 × 2000 × 1600 mm, Machine weight : 4000 kg.

Manufacturer
Mori Seiki
Model
SH 400
Year
1999
No. Series
665
Observations
CNC machining center 4 axes. Mori seiki controller, type: Msc 501, Longitudinal travel X: 560 mm, Transversal travel Y: 510 mm, Vertical travel Z: 510 mm, Max. Spindle: 12,000 rpm, Table length: 400 mm, Table width: 400 mm, Air blow in the spindle, Tool break detection, Table load capacity: 500kg, Max. Diameter of the tool: 125 mm, Machine weight: 10,400 kg.

Manufacturer
Brown-Sharpe
Model
MXCEL PFX 454
Year
1999
No. Series
1099-1928
Observations
Three-dimensional machine covered X, Y, Z axes: 400mm x 500mm x 400mm.

Manufacturer
Tago
Model
50-900
Observations
Column Drill, Capacity: 50mm, L: 610mm, V: 550mm

Observations
Several tools of workshop of molderia, Composed by (x2) tables of work with clamp, saw tronzadora, auxiliary supports,

Observations
Various tooling of milling shop machinery, mainly composed of drill bits and milling cutters.

Manufacturer
Hyd-Mech
Model
S20-A
Observations
Cutting saw, 90 ° rectangular capacity: 330 mm H x 457 mm W, 90 ° round capacity: 330 mm, blade dimensions: 25.4 x 4521 mm; Engine power: 2.2 kW, blade speed: 13-100 m / min, coolant tank capacity: 22 liters, machine weight: 997 kg, machine dimensions: Width: 2337 mm, Length: 1905 mm, Height : 1320mm

Manufacturer
Oxiterm
Model
50
Observations
Composed of three rotating rotary gas furnaces for cast iron. Oxygen ovens, with natural gas propulsion system, 5TN "Sidder-Progetti", type: Oxiterm 50. Rotary oven 1: model / serial number GN97FE0001.- Rotary oven 2: model / serial number GN97FE0002.- Oven rotary 3: model / serial number GN97FE0003.

Manufacturer
Clark
Model
C-25 D
Year
2003
No. Series
P232D-1046-9646- KF
Observations
Diesel forklift, lifting capacity: 2.500Kg, max. Height: 3.300mm; Nominal power: 42.9kW, Weight of the battery without battery: 4.038Kg, Hours approx. of work: 3,990 hours, registered: 9644-BFK.

Manufacturer
Nissan
Model
Y 1D2A 25 C
Year
2011
No. Series
YYD2E70217
Observations
Diesel forklift, Lifting capacity: 2.500Kg, with side shifter, Max. Elevation: 4.750mm, Working hours approx .: 10.900 Hours.

Manufacturer
Caterpillar
Model
914G
Year
2009
No. Series
9WM00985
Observations
Loader blade; Standard tires: 17.5-25; Spoon width: 2,401 mm; Bucket capacity: 1.4 m³; Type of address: KL; Transport length: 6.23 m; Transport width: 2.4 m; Transport height: 3.1 m; Speed: 35 km / h; Maximum pouring height: 2.72 m; External turning radius: 4.75 m; Lifting power: 58.5 kg; Engine: Caterpillar, Model: 3054 DIT; Engine performance: 69 kW; Displacement 4 l; Revolutions: 2200 rpm; Machine weight: 7.3 t.

Manufacturer
Inductotherm
Model
VIP Power trak 2500
Year
2017
No. Series
FFFPT1247-PT05127 B1396
Observations
Independent electric furnaces with two tanks of fusion power: 2,500 kW and 6 tn. Additional information: one of them is the coil burned and broken in the refractory tank. Very few hours of use.